Advantech ISA bus data acquisition and control card | Analog Output PCL-726 | 6-channel 12-bit analog Products PCL-726 is a 6-channel 12 has an analog output channel full-length data acquisition card. You can configure each channel output range to the following values: 0 to + 5V, 0 to + 10V, + / - 5V, + / - 10V and 4 to 20mA current loop (sink). PCL-726 is specially designed for industrial environments, the need for multi-channel analog output or current loop applications are an ideal, cost-effective solution. In addition to the analog output outside, PCL-726 also offers 16 digital outputs and 16 digital inputs. TTL compatible D / I, and D / O ports can be easily obtained in the industrial / off control and monitoring applications used in the terminal plate to connect with us. Product specifications analog output (D / A) channels:?? 6 Resolution:? 12, double-buffered D / A converter output voltage range of variety:? L unipolar: 0 ~ 10V, 0 ~ 5V l Bipolar: ± 5V, ± 10V l current loop (irrigation): 4 ~ 20mA, with external DC or AC voltage reference parameters:??? Internal 5V or 10V, external + 10V or -10V maximum all D / A output reset or after power are set to 0? 16 TTL digital inputs and digital outputs 16TTL? PC / AT bus architecture Features 1.6 independent analog outputs 2.12 double buffer resolution D / A converter 3. multiple voltage range: ±± 10V, ± 5V 10V, ± 5V, 0 ~ + 5V, 0 ~ + 10V and 4 ~ 20mA current loop (sink) 4.16 digital inputs and 16 digital outputs 5 After power-up or reset, each analog output channel default output is 0V, either unipolar or bipolar Specifications 1. Analog Output (D / A converter) channels: 6 Resolution: 12, double buffering Output range: Unipolar: 0 ~ + 5V, 0 ~ + 10V Bipolar: ± 10V, ± 5V current loop (sink): 4 ~ 20mA, ± 10VDC or AC external reference voltage on: Internal: -5V ( ± 0.05V), - 10V (± 0.05V) External: DC or AC, maximum ± 10V D / A conversion device simulation: AD7541AKN, 12-bit linearity: ± 1/2-bit precision: ± 0.0012% of full scale temperature drift : 2PPM / ° C set-up time: 70 ms maximum use of OP-07 output amplifier current loop: 4 ~ 20mA (sink) Voltage Output Current: ± 5mA (maximum) current loop excitation voltage: Minimum + 8V, maximum + 36V or 4 ~ 20mA current loop Reset (Power) Status: All D / A output channels at power-up or reset all of 0V (bipolar and unipolar mode) 2. digital input channels: 16 TTL compatible input DI Voltage: Low: 0 ~ 0.8V High: Minimum 2V input Load: Low: + 0.5V @ 0.4mA (maximum) high: + 2.7V @ 0.05mA (maximum) 3. Digital Output Channel: 16 Level: Compatible with TTL level DO drive capacity: low :( Meeting) 8mA @ 0.5V (maximum) high :( source) 0.05mA @ 2.4V (minimum) 1.4 General characteristics 1. Power: + 5V @ 500mA (typical), 1A (maximum) + 12V @ 80mA (typical), 110mA (maximum) -12V @ 60mA (typical), 90mA (max) 2. Operating Temperature: 0 ° ~ 50 ° C (32 ° ~ 122 ° F) 3. Storage temperature: 0 ° ~ 60 ° C (32 ° ~ 149 ° F) 4. Operating Humidity: 5% ~ 95% RH, non-condensing 5. Interface: a DB-37 female connector, two 20-pin ribbon cable connector pin type 6. Dimensions: 340mm (L) * 100mm (H) fttilslli